| ANSI Pipe Fittings Series Main production materials | |||||
| Material name | |||||
| ASTM A105, 20 #, Q235, 16Mn | |||||
| ASTM A182 F304, F316, 316L, 321 |
| Flange type | Thickness range | Caliber range | Implementation standards | ||||
| elbow | SCH10-SCH160 | 1/2 "-48" | ANSI B16.9 | ||||
| Tee | 1 1/2 "* 1 1/2" -24 "* 18" | ||||||
| Reducer | 1 "* 3/4" -24 "* 22" | ||||||
| Tube cap | 1/2 "-48" |
| ANSI pipe fitting dimensions and connection dimensions | |||||||
| Long radius elbow | |||||||
| Nominal diameter (inches) | Outer diameter | Thickness (mm) | |||||
| D | SCH10 | SCH30 | STD | SCH40 | XS | SCH80 | |
| 1/2 | 21.3 | 2.11 | 2.41 | 2.77 | 2.77 | 3.73 | 3.73 |
| 3/4 | 26.7 | 2.11 | 2.41 | 2.87 | 2.87 | 3.91 | 3.91 |
| 1 | 33.4 | 2.77 | 2.9 | 3.38 | 3.38 | 4.55 | 4.55 |
| 1 1/4 | 42.2 | 2.77 | 2.97 | 3.56 | 3.56 | 4.85 | 4.85 |
| 1 1/2 | 48.3 | 2.77 | 3.18 | 3.68 | 3.68 | 5.08 | 5.08 |
| 2 | 60.3 | 2.77 | 3.18 | 3.91 | 3.91 | 5.54 | 5.54 |
| 2 1/2 | 73 | 3.05 | 4.78 | 5.16 | 5.16 | 7.01 | 7.01 |
| 3 | 88.9 | 3.05 | 4.78 | 5.49 | 5.49 | 7.62 | 7.62 |
| 3 1/2 | 101.6 | 3.05 | 4.78 | 5.74 | 5.74 | 8.08 | 8.08 |
| 4 | 114.3 | 3.05 | 4.78 | 6.02 | 6.02 | 8.56 | 8.56 |
| 5 | 141.3 | 3.4 | - | 6.55 | 6.55 | 9.53 | 9.53 |
| 6 | 168.3 | 3.4 | - | 7.11 | 7.11 | 10.97 | 10.97 |
| 8 | 219.1 | 3.76 | 7.04 | 8.18 | 8.18 | 12.7 | 12.7 |
| 10 | 273.1 | 4.19 | 7.8 | 9.27 | 9.27 | 12.7 | 15.09 |
| Tee | ||||||
| Nominal diameter (inches) | Outer diameter | STD | SCH40 | |||
| D1 | D2 | t1 | t2 | t1 | t2 | |
| 1 1/2 * 1 1/2 | 48.3 | 48.3 | 2.77 | 2.77 | 2.77 | 2.77 |
| 2 * 3/4 | 60.3 | 26.7 | 3.91 | 2.87 | 3.91 | 2.87 |
| *1 | - | 33.4 | - | 3.32 | - | 3.38 |
| * 1 1/4 | - | 42.2 | - | 3.56 | - | 3.56 |
| * 1 1/2 | - | 48.3 | - | 3.68 | - | 3.68 |
| *2 | - | 60.3 | - | 3.91 | - | 3.91 |
| Tube cap | ||||||
| Nominal diameter (inches) | Outside diameter D | E height | Limit thickness | Height E1 | t | |
| Hidemura | mm | SCH40 | ||||
| 1/2 | 0.84 | 21.34 | 25.4 | 4.57 | 25.4 | 0.109 |
| 3/4 | 1.05 | 26.67 | 25.4 | 3.81 | 25.4 | 0.133 |
| 1 | 1.315 | 33.4 | 38.1 | 4.57 | 38.1 | 0.133 |
| 1 1/4 | 1.66 | 42.2 | 38.1 | 4.83 | 38.1 | 0.14 |
| 1 1/2 | 1.9 | 48.2 | 38.1 | 5.08 | 38.1 | 0.145 |
| 2 | 2.375 | 48.3 | 38.1 | 5.59 | 44.5 | 0.154 |
| Reducer | ||||||
| Nominal diameter (inches) | Outer diameter | STD | SCH40 | |||
| D1 | D2 | t1 | t2 | t1 | t2 | |
| 1 * 3/4 | 33.4 | 26.7 | 3.38 | 2.87 | 3.38 | 2.87 |
| 1 1/2 * 3/4 | 48.3 | 26.7 | 3.68 | 2.87 | 3.68 | 2.87 |
| *1 | - | 33.4 | - | 3.38 | - | 3.38 |
| * 1 1/4 | - | 42.2 | - | 3.56 | - | 3.56 |
| 2 * 1 | 60.3 | 33.4 | 3.91 | 3.38 | 3.91 | 3.38 |
| * 1 1/4 | - | 42.2 | - | 3.56 | - | 3.56 |
Copyright © Hebei Yaosheng IM & EX Trading Co.,Ltd. All Rights Reserved |Sitemap | Technical Support: 
English
Russian
Chinese
